Revestimiento Liso Blanco
Revestimiento Liso Blanco
Revestimiento Liso Blanco
Revestimiento Liso Blanco

Thermal and acoustic insulation paint

€70.18
Tax included

PLASTIC PAINT WHITE THERMAL AND ACOUSTIC

Water-based paint that provides thermal and acoustic insulation.

These properties result in retention of indoor temperature, resulting in energy savings.

Avoid condensation and produces thermal break in the song of the slabs.

It can be used both Interio and abroad.

Painting FONOTERMAL

LITERS
Color
FINISH

Total Rating Total Rating:

0 1 2 3 4
0/5 - 0 reviews

  Add Review View Reviews View Reviews

If you want MORE about THERMAL PAINT AND FOLK, nuestgro visit BLOG CLICKING HERE

.

FONOTERMAL WHITE PLASTIC PAINT SHOP WITH THERMAL AND ACOUSTIC COATING FOR INTERIOR AND EXTERIOR WALLS

.

BUY PAINT FONOTERMAL, Anticondesación painting, insulating, mold and antisora.

.

BUY PAINT THERMAL INSULATION AND ANTI SONORA

Our range of paint for thermal insulation allows walls, floors, ceilings, walls and roofs are perfectly isolated from the winter cold and summer heat

.

NATURE AND COMPOSITION OF PAINT THERMAL AND ACOUSTIC INSULATION

FONOTERMAL is an aqueous paint, washable basis and that their particular and novel features represents a unique and revolutionary advance in the current field of decorative paints.

Presents insulating properties, soundproof barriers and, consequently, the incorporation in their formulation of hollow glass microbubbles, replacing other components of mineral nature.

Its low thermal conductivity makes retaining wall, preventing or minimizing, temperature changes across the walls, retaining heat, preventing external penetration, both heat and cold.

All of this works, a pleasant thermal environment in both winter and summer, and an appreciable energy savings for the classification PAINTING PAINTING our INSULATED.

Surface coating for concrete protection CE marked according to UNE-EN-ISO 1504-2: 2005.

With a Coefficient of Thermal Conduction: λ = 0.056 (UNE 92202: 1989)

.

CHARACTERISTICS OF PAINT THERMAL INSULATION AND ACOUSTIC

The heat shield has thermal insulating properties so that minimizes temperature changes through the walls, preventing external penetration of both heat and cold.

With insulating decorative painting, you will notice savings in consumption of heating and air conditioning.

Washable, moisture and mold.

Experiments show that a temperature variation ranging from 3 to 8 ° C, with application of the product depending on the thickness of the applied layer is achieved.

The thermal and acoustic insulating paint can be repainted with any acrylic paint to give fineness of appearance, to change the color, or portegerla overly aggressive environments. (Since being a bit rough, it will stain more)

.

FIELDS OF APPLICATION OF PAINT AND ACOUSTIC INSULATION THERMAL

Anticondesación painting, heat insulation, anti rust and anti Sound

You can apply insulating decorative painting, INDOOR where thermal and acoustic insulation or condensation problems eliminización required.

It acts as a thermal break at the edges of the slabs.

In EXTERIOR as thermal acoustic insulation.

To prevent condensation in places with high humidity (bathrooms, kitchens, living rooms, ceilings ...), food industries sector (canneries, bakeries, lactic industries ...), restaurants, bars, ect ...

Can double its insulating effect, while painting the interior and exterior of a façade or roof.

.

DIRECTIONS OF PAINT AND ACOUSTIC INSULATION THERMAL

-The Surface must be free of dust, grease and old paint; for it is advisable to conduct a scrape or prepare the substrate with a sealant varnish.

-Homogeneizar Removing the container contents thoroughly.

-The Application can be done by brush, roller or trowel

-The Firsthand apply diluting 10-20% water; for the second hand can be diluted up to 10% or applied to the use.

Do not apply below 5 ºC.

.It Can be stained with dyes to water

CE MARKING PAINT THERMAL AND ACOUSTIC INSULATION

is CE marked in accordance with the guidelines of the harmonized European standard EN-1504-2: 2005 and UNE-EN

1504-8 Products and systems for the protection and repair of structures

concrete.

- Adhesion by direct tensile 1.7 MPa (UNE-EN-1542: 1999)

- Water vapor permeability (UNE-EN-ISO 7783-2012):

Thickness equivalent air layer Sd-0.4 m (Sd being less than 5 m is considered as UNE-EN-1504-2: 2005 permeable

water vapor, belonging to the class I)

- Carbon dioxide permeability (UNE-EN-1062-6: 2003):

Air layer diffusion equivalent Sd> 50 m

- Capillary absorption and permeability to water w <0.1 kg / (m2

· H0,5)

(UNE-EN-1062-3: 2008)

- Surface Drying 45 minutes

(UNE-EN-ISO 1517: 1996)

.

The technical advice for the use and application of our products are given according to our best knowledge and information, the result of tests conducted in our laboratories and our experience gathered over the years customer service. 
Paintings ANGAR, SC is not liable for problems caused by incorrect application of products

.

IF YOU WANT TO KNOW THE PRICE OF PAINTING DECORATIVE THERMAL AND ACOUSTIC INSULATION, you can look AT THE BEGINNING OF THIS PAGE

.

.

Repainted
12 Hours (Can be painted over with any latex paint)
Theoretical performance
Between 2.5 and 3.5 square meters per Kilo and Hand (Depending on the media, whether it is new or already painted)
FINISH
Dull
Solvent
Water
Useful of Application
BRUSH / ROLLER / FLAT
Cleanliness Tool
Water
Dissolution of the first hand
Between 10 % and 20 %
Dissolution in the second hand
Between 0 % and 10 %
Color
WHITE
Liters
4 L y 20 L
Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
TOUCH: 1 hour
Temperature of Application
Between 5 and 35 centigrade degrees
Thickness of the cap
750 Microns (TRES MANOS) a thickness of 1 MM is recommended
Density
0.75 - 0.85 grs / cm3
ORDETERMIC

Reviews Reviews (0)

Based on 0 reviews - 0 1 2 3 4 0/5
Product added to wishlist
Product added to compare.

Portes Gratis Angar para pedido + 75 €

iqitcookielaw - module, put here your own cookie law text