Acrylic paint pools (All Colors)
POOLS PAINT (COLOR TO SIZE)
ALL COLORS RAL
Turquoise, sand, green, red ... Choose your favorite colors !!
Art acrylic paint, with high wear resistance, very good adhesion, high performance pigments and ensuring the color over the years.
Product customizationDon't forget to save your customization to be able to add to cart
You NEED THIS PAINT THINNER FOR PROPER APPLICATION (READ MORE IN INSTRUCTIONS, further down)
We PAINT FOR YOU BUILD YOUR POOL IN THE COLOR THAT YOU LIKE MORE COLOR CHART RAL (You only have to enter the reference of the desired color, the bottom of the page in product customization)
BUY PAINT POOL OF THE BEST QUALITY
BUY PAINT POOL thermoplastic acrylic SOLVENT
COMPOSITION OF PAINT POOL thermoplastic acrylic SOLVENT
Paint thermoplastic acrylic resin air-drying solvent.
FEATURES AND BENEFITS OF PAINT POOL thermoplastic acrylic SOLVENT IN COLORS
Films provides high hardness and abrasion resistance, fresh water, salt water, mineral oils, the pool cleaning products, acids and alkalis.
Penetrates by capillary action, making a perfect seal of the concrete prevents the penetration of moisture, waterproofing glass pools.
Applied films are highly flexible and absorb contractions and expansions produced by sunlight.
The pools Thermoplastic Acrylic paint is improved paints pools chlorinated rubber formula, with these newer and better.
PROPERTIES FOR POOLS PAINT SOLVENT thermoplastic acrylic COLORS
- High opacity.
- High performance.
- Great Adhesion
- Tensile strength
- Resistance to alkalinity.
- Abrasion resistance.
- Perfect combination of elasticity and hardness.
USES OF POOL ACRYLIC PAINTING SOLVENT
To paint and decorate both inside and outside pools of cement, concrete, metal, etc ...
HOW DO I APPLY FOR POOLS ACRYLIC PAINT SOLVENT?
Stir well the material surfaces to be painted must be dry, clean and consistent.
If the soil is not very porous, it will have to make a chemical or mechanical treatment for April pore and get a better grip.
DIRECTIONS FOR USE FOR PAINT POOL
Please wait for 24 to 48 hours, after emptying the pool for perfect drying of the same, before painting.
And back to wait between 24 and 48 hours after painting to refill the pool water for proper drying of the paint.
It is much better to apply paint early in the morning, so that the bracket is not too hot, and do not accelerate the drying process. (Apply a coat every day, if possible)
Check the paint is completely dry between coats (not only surface but deep layer, to avoid bubbles and blisters.
If you want to give a first hand to use as a primer, dilute the paint with approx. 20% synthetic fast drying solvent.
Give one or two hands to homogenize desired texture and opacity. (We recommend to two well diluted hands, instead of a heavier hand.)
Masonry surfaces must be dry in order to allow moisture levels and alkalinity to decrease as possible.
On concrete or new cements will have to wait for its full setting (30 days approx.)
If the paint surface is in good condition, remove dust and apply one or two layers of special paint pools. (We recommend to two well diluted hands, instead of a thicker)
If the old surface is in poor condition should be removed loose and friable surfaces and proceed as a new surface.
PRESENTATION OF PAINT THINNER FOR POOLS IN COLORS
It comes in bottles of 4.5 kilos and 23 kilos.
Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service.
ANGAR paintings, SC will not be responsible for problems caused by incorrect application of our products.
If you want to know the POOL PAINT THINNER thermoplastic acrylic THE PRICE IN ANY COLOR RAL color chart, you can consult the top of this page.
- Theoretical performance
- Between 10 and 12 square meters Kilo X X Hand (Depending on the media, it is new or already painted)
- After 6 hours at least
- Disolvente Industrial de Secado Rápido
- Useful of Application
- Brush / Roller / Airles (To apply a gun, it must be diluted with Retarder Thinner for acrylic paint)
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- All letters colors RAL and NCS colors
- 4.5 KILOS / 23 KILOS
- Humedad del soporte
- Inferior al 5 %