Paint BLUE POOL (Solvent Acrylic)
POOL PAINT, ACRYLIC SOLVENT IN BLUE
Painting for freshwater swimming and seawater.
Paint pools with high wear resistance, quick drying, sheath with good penetration and adhesion, high performance pigments ensures a very low color degradation over the years.
Color NCS S1060-B
NEED THIS PAINT THINNER (Read more on How to Use)
BUY PAINT POOL thermoplastic acrylic SOLVENT IN BLUE
PAINT COLOR OF OUR POOL IN BLUE: NCS: S 1060-B / RAL 5015 APPROX
COMPOSITION OF POOL ACRYLIC PAINT SOLVENT
Pool paint formulated from thermoplastic acrylic resin solvent by air drying.
FEATURES AND BENEFITS OF THERMOPLASTIC ACRYLIC PAINT SOLVENT
Films provides high hardness and abrasion resistance, fresh water, salt water, mineral oils, the pool cleaning products, acids and alkalis.
Penetrates by capillary action, making a perfect seal of the concrete prevents the penetration of moisture, waterproofing glass pools.
Applied films are highly flexible and absorb contractions and expansions produced by sunlight.
The pools Thermoplastic Acrylic paint is improved paints pools chlorinated rubber formula, with these newer and better.
PAINT PROPERTIES FOR POOLS thermoplastic acrylic SOLVENT
- High opacity.
- High performance.
- Great Adhesion
- Tensile strength
- Resistance to alkalinity.
- Abrasion resistance.
- Perfect combination of elasticity and hardness.
- Very resistant to clean swimming pools.
FIELDS OF APPLICATION OF PAINT ACRYLIC SOLVENT FOR POOLS
For painting and decorating, both indoors and outdoors pools of cement, concrete, metal.
DIRECTIONS THERMOPLASTIC ACRYLIC PAINT SOLVENT
Please wait for 24 to 72 hours, after emptying the pool for perfect drying of the same, before painting.
And back to wait between 5 days to 1 week after painting to refill the pool of water, for perfect results.
-Remover Well the material surfaces to be painted must be dry, clean and consistent.
If the soil is slightly porous, it will have to make a chemical or mechanical treatment for April pore and get a better grip.
PAINT NEW POOLS
If you want to give a first hand to use as a primer, dilute the paint with approx. 20% solvent.
Give one or two hands to homogenize desired texture and cover (with a 5% dilution) masonry surfaces must be dry in order to allow moisture levels and alkalinity to decrease as possible.
On concrete or new cements will have to wait for its full setting (30 days approx.)
PAINT AND PAINTED POOLS
If the paint surface is in good condition, remove dust and apply one or two layers of special paint pools.
If the old surface is in poor condition should be removed loose and friable surfaces and proceed as a new surface.
PRESENTATION OF POOL TO PAINT THINNER
It comes in bottles of 4.5 kilos and 23 kilos.
Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service.
ANGAR paintings, SC will not be responsible for problems caused by incorrect application of our products.
If you want to know the POOL PAINT THINNER thermoplastic acrylic THE PRICE IN BLUE POOLS, you can consult the top of this page.
- After 6 hours at least
- Theoretical performance
- Between 10 and 12 square meters Kilo X X Hand (Depending on the media, it is new or already painted)
- Disolvente Industrial de Secado Rápido
- Useful of Application
- Brush / Roller / Airles (To apply a gun, it must be diluted with Retarder Thinner for acrylic paint)
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- AZUL PISCINAS
- 4.5 KILOS / 23 KILOS
- Humedad del soporte
- Inferior al 5 %