FIXING RESIN ÁRIDOS
RESIN FOR FIXING AND DECORATIVE AGGREGATE PAVEMENT
Compaction and resin for fixing marble floors, stones, gravel or other aggregates.
Fixer and as a binding surface mass of crushed commonly used in road traffic circles, decorating gardens, tree pits, roads etc ..
Walkable for trafficking, not for traffic.
BUY FIXER binder or TRITURADOS
BUY RESIN FOR FIXING decorative aggregates and gravel
COMPOSITION OF ARID binding resin
Aqueous formulation suitable for coating decorative concrete flooring and dispersion as a binder and / or fixing marble or other aggregates.
FIXING resin characteristics of aggregates and TRITURADOS
Aqueous dispersion suitable for formulating decorative concrete varnish
flooring and as a binder and / or fixative crushed marble or other aggregates.
Good adhesion on concrete. Good resistance against aging
UV and weather aggression. Excellent resistance to water, with a
Special marking hydro-repellent effect.
As fixer and as a binding surface mass of crushed marble, or other
commonly used types of aggregates in road roundabouts, decoration
gardening etc ...
This emulsion is walkable for trafficking but not for traffic.
· Polymer extraordinary hardness and low film forming temperature.
- Good adhesion on concrete.
- Frenta good aging resistance to UV radiation and climatic aggressions.
- Excellent water resistance, with a marked espedial hydro-repellent effect.
- Polymer extraordinary hardness and low film forming temperature
- It increases the impact strength and granule release time.
- Applications with high particle sizes, completely keep the draining effect.
- Polymer with good heat resistance, without blocking, which makes it resistant to environmental dirt
- Gives a perfect semi-matte finish, enhancing the natural appearance of concrete.
· Appearance: Liquid, white, slightly transparent.
· Solids content: 40 + -1%
· Viscosity: <1000 cpoises
· PH: 7.5-9
· Emulsifier System: Anionic
WHERE CAN I USE THE FIXING OF ARID RESIN and crushed or binder for TRITURADOS?
As fixer and as a binding surface mass of crushed marble, gravel or other aggregates commonly used in road traffic circles, decorating gardens, paths, playgrounds, tree pits, etc ...
Resin for fixing floors with different types of aggregates. Prevents erosion, presence of animals, protect vegetation, while retaining moisture and has good drainage.
With the application of fixer crushed or fixing resin paving, the aggregate is fixed and compacted, and produces a porous pavement which makes it ideal for carrying out tree pits.
This emulsion is walkable for trafficking, not for traffic.
The required amount of binder by the dry or decuado materiala to said application in concrete is poured. Mix for 10 minutes. to observe a completely homogeneous mixture.
The mixture is poured into the mold or support directly.
Drying depends on the thickness of lpavimento to 4cm thick recommended 3 days of drying.
Consumption depends on the type selected arid, Gravel 8-10mm grain size required 7% of the weight of the aggregate.
In applications agglomerate of aggregates, as a guideline recommend
The following dosages
1.5 - 2.0 cm. 3.5%
1.0 to 1.5 cm. 5%
0.7 to 1.0 cm. 7%
Spray for surface applications depend consumption, not surprisingly, of
For guidance and gradings based on previous consumption level is between 800 - 1200 g / m2. The thickness of the layer of aggregates range from 3 - 5 cm.
PRECAUTIONS ON USING RESIN binder CRUSHED OR FIXER ÁRIDOS
No special precautions regarding toxicity are required, not flammable.
PRESENTATION OF RESIN FIXING OF AGGREGATES
It comes in packs of 5 and 25 liters.
Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service.
ANGAR paintings, SC is not responsible for the problems caused by incorrect application of products
If you want to know the RESIN FIXING AGGREGATE OR CRUSHED OR PRICE TRITURADOS binder, you can consult it in the top of the page
- Transparent or colorless
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- 4 HORAS
- Temperature of Application
- Between 5 and 35 centigrade degrees